Troubleshooting Cisco Data Center Infrastructure 300-615-DCIT

Cisco (300-615-DCIT) Exam Questions And Answers page 10

Previous Questions

Next Questions

What conditions should be verified if a POAP-enabled Cisco Nexus switch does not enter POAP mode?

Multiple Choice

A POAP-enabled Cisco Nexus switch will not enter POAP mode.

Which two conditions should be verified? (Choose two.)

No startup configuration is available.

The switch is in bootup process.

The license file is missing on the switch.

Bootflash must contain a special directory named POAP with poap.py file.

No Cisco NX-OS image is present on the bootflash.

Data Center Infrastructure Troubleshooting Data Center Network Services Troubleshooting

What is the recommended method to upgrade BIOS firmware on a Cisco UCS standalone C-Series server?

Single Choice

Which method must a network engineer use to upgrade the BIOS firmware or a Cisco UCS standalone C-Series rack-mount server?

Use the U-ACPI Interface.

Use the Cisco host upgrade utility.

Use the Cisco hardware upgrade utility.

Use the Cisco host firmware policy.

Data Center Infrastructure Troubleshooting Data Center Network Services Troubleshooting

What adjacency server configuration enables dual-site adjacency for two OTV edge devices in the same site?

Single Choice

Which adjacency server configuration makes two OTV edge devices located in the same site bring up the dual-site adjacency?

Data Center Infrastructure Troubleshooting Data Center Infrastructure Troubleshooting

What action should be taken to resolve the issue of applications failing to reach the DNS server in a VXLAN EVPN data center?

Single Choice

An engineer troubleshoots a VXLAN EVPN data center. The applications in the data center fail to reach the DNS server that is located at IP 10.10.10.10. The engineer examines the BGP EVPN routing table and notes that the IP prefix route that covers the DNS server is missing. Which action resolves the issue?

Set the IP prefix route to represent [5]:[0]:[0]:[32]:[10.10.10.10]/224 in the routing table.

Set the IP prefix route to represent [2]:[0]:[0]:[48]:[0050.569f.1285]:[0]:[0.0.0.0]/216 in the routing table.

Configure an IP ARP entry to represent [2]:[0]:[0]:[48]:[0050.569f.1285]:[32]:[10.10.10.10]/272 in the routing table.

Configure an IP ARP entry to represent [4]:[0300.0000.00fc.bd00.0309]:[32]:[10.10.10.10]/136 in the routing table.

Data Center Infrastructure Troubleshooting Data Center Network Services Troubleshooting

How to resolve the issue of failing to bind the Ethernet interface to vFC?

Single Choice

Refer to the exhibit. An attempt to bind the Ethernet interface to vFC fails. Which action resolves the issue?

Add the FCoE VLAN to the allowed VLAN list.

Configure the FCoE VLAN that corresponds to the vFC VSAN as a private VLAN.

Configure the interface as a trunk port.

Configure the interface to use the native VLAN of the trunk port.

Data Center Infrastructure Troubleshooting Data Center Infrastructure Troubleshooting

How can an engineer resolve an upgrade failure issue on a switch?

Single Choice

Refer to an exhibit. An engineer is troubleshooting an upgrade failure on a switch. Which action resolves the issue?

Save the system image in NVRAM.

Use the same system image as the kickstart image.

Load a new system image.

Reload the same system image.

Data Center Infrastructure Troubleshooting Data Center Infrastructure Troubleshooting

What are the actions that resolve the faults in Troubleshooting Cisco Data Center Infrastructure certification exam?

DragAndDrop

Drag and drop the actions from the left onto the faults that they resolve on the right. Not all actions are used.

Data Center Infrastructure Troubleshooting Data Center Infrastructure Troubleshooting

What setting should be selected to configure autonegotiation for Cisco IMC server management NIC?

Single Choice

An engineer must configure Cisco IMC server management NIC for autonegotiation.

Which setting should be selected?

shared LOM

Cisco card

dedicated

shared LOM EXT

Data Center Infrastructure Troubleshooting Data Center Network Services Troubleshooting

How to resolve Cisco UCS Manager not showing servers connected to a Cisco Nexus 2248PQ FEX?

Single Choice

A system administrator connects a Cisco Nexus 2248PQ FEX to a fabric interconnect to expand the ports that are available for connecting Cisco UCS C-Series Rack Servers. In Cisco UCS Manager, the administrator does not see the servers connected to this FEX. Which action should be taken to resolve the issue?

The FEX must be exchanged so that it supports the connectivity between fabric interconnects and UCS C-Series servers

The fabric interconnects must be rebooted before the FEX is recognized

The transceivers must be exchanged to support the connectivity between the FEX and the fabric interconnects

The ports that connect the FEX to the fabric interconnects must be configured as server ports

Data Center Infrastructure Troubleshooting Data Center Network Services Troubleshooting

How to resolve the "No Signal" issue during the boot process of a Cisco UCS C-Series Rack Server?

Single Choice

During a boot process of a Cisco UCS C-Series Rack Server, an engineer receives a No Signal message from the vKVM and physical video connection. Which set of steps resolves the issue?

1. Disconnect the power cord.
2. Confirm that all cards are properly seated.
3. Connect the power cord and power on the server.

1. Power off the server and disconnect the power cord.
2. Confirm that all cards are properly seated.
3. Connect the power cord and power on the server.

1. Disconnect the power cord.
2. Confirm that all cards are properly seated.
3. Connect the power cord.

1. Power off the server and disconnect the power cord.
2. Confirm that all cards are available.
3. Connect the power cord and power on the server.

Data Center Infrastructure Troubleshooting Data Center Infrastructure Troubleshooting

Previous Questions

Next Questions

Cisco (300-615-DCIT) Exam Questions And Answers page 10

What conditions should be verified if a POAP-enabled Cisco Nexus switch does not enter POAP mode?

Comments

What is the recommended method to upgrade BIOS firmware on a Cisco UCS standalone C-Series server?

Comments

What adjacency server configuration enables dual-site adjacency for two OTV edge devices in the same site?

Comments

What action should be taken to resolve the issue of applications failing to reach the DNS server in a VXLAN EVPN data center?

Comments

How to resolve the issue of failing to bind the Ethernet interface to vFC?

Comments

How can an engineer resolve an upgrade failure issue on a switch?

Comments

What are the actions that resolve the faults in Troubleshooting Cisco Data Center Infrastructure certification exam?

Comments

What setting should be selected to configure autonegotiation for Cisco IMC server management NIC?

Comments

How to resolve Cisco UCS Manager not showing servers connected to a Cisco Nexus 2248PQ FEX?

Comments

How to resolve the "No Signal" issue during the boot process of a Cisco UCS C-Series Rack Server?

Correct Answer:

References:

Comments

{{ exam.shortName }}

{{ exam.longName }}