Troubleshooting Cisco Data Center Infrastructure 300-615-DCIT

Cisco (300-615-DCIT) Exam Questions And Answers page 16

How to resolve the issue of being unable to log in to the Cisco IMC page of a Cisco UCS C220 server?

Single Choice

Refer to the exhibit. An engineer cannot log in to the Cisco IMC page of the Cisco UCS C220 server. Which action resolves the issue?

Use the FQDN of the Cisco IMC webpage login page instead of the IP address for the connection to be secure.

Replace the self-signed certificate that is installed on the Cisco IMC with a user certificate that is signed from the client corporate certificate authority.

Use the DNS of the Cisco IMC webpage login page instead of the IP address for the connection to be secure.

Replace the self-signed certificate that is installed on the Cisco IMC with a server certificate that is signed from the client corporate certificate authority.

Data Center Infrastructure Troubleshooting Data Center Infrastructure Troubleshooting

How to resolve a server failing to boot from the operating system after a RAID1 cluster migration?

Single Choice

A server fails to boot from the operating system after a RAID1 cluster migration. The RAID remains in an inactive state during and after a service profile association. Which action resolves the issue?

Configure the SAN boot target in the service profile.

Configure the SAN boot target to any configuration mode.

Use a predefined local disk configuration policy.

Remove the local disk configuration policy.

Data Center Infrastructure Troubleshooting Data Center Network Services Troubleshooting

How to resolve the issue of both switches showing HSRP instance as active?

Single Choice

Refer to the exhibit. The HSRP instance on both switches is showing as active. Which action resolves the issue?

Configure the HSRP timers to be the same.

Allow VLAN 100 between the switches.

Configure the IP address of N9K-B on the same subnet as N9K-A.

Configure preempt on only one of the switches.

Data Center Infrastructure Troubleshooting Data Center Infrastructure Troubleshooting

How can the vPC neighborship between two switches be resolved and brought up from a suspended state?

Single Choice

Refer to the exhibit. The vPC neighborship between two switches is in suspended state. Which configuration change resolves the issue and brings up the vPC neighborship?

Change STP Port Type to Network on the peer switch

Enable Bridge Assurance on the local switches

Configure QoS MTU value of 9216 on the peer switch

Add VLAN 400-401 to the configuration on the local switch

Data Center Infrastructure Troubleshooting Data Center Infrastructure Troubleshooting

What are the requirements for using Puppet in a Cisco NX-OS environment?

Single Choice

What is required for using Puppet in a Cisco NX-OS environment?

OpenNP

XML management interface

NX-API

Open Agent Container

Data Center Infrastructure Troubleshooting Data Center Automation and Orchestration Troubleshooting

What action resolves the issue when receiving a 400 error after running a curl command?

Single Choice

When the engineer runs the command, this error is received:

opsengineer@wkst1:/home/auto/bash_scripts$ curl s b cookie_file_39916907.txt X GET k 192.15.132.101/api/node/class/Tenant.json { totalCount : 1 , imdata :[{ error :{ attributes :{ code : 400 , text : Request failed, (output omitted) }}}]}

Which action resolves the issue?

Regenerate the API token object

Modify the URI to 192.15.132.101/api/node/class/fvTenant.json

Add the c class Tenant flag to the cURL command

Change the HTTP verb to POST

Data Center Infrastructure Troubleshooting Data Center Network Services Troubleshooting

How to resolve the issue of Linux hosts failing to boot from SAN on Cisco UCS B-Series Servers?

Single Choice

An engineer must configure Linux hosts that are deployed on Cisco UCS B-Series Servers to boot from SAN. The SAN boot policy is configured in Cisco UCS Manager, and the boot order is verified to be set as expected. However, the Linux hosts fail to boot. Which action resolves the issue?

Delete and reconfigure the boot LUN.

Delete and reconfigure the pWWN of the SAN boot target.

Remove all of the ISO images that are mounted as a virtual CD-ROM.

Remove all of the local storage that is installed.

Data Center Infrastructure Troubleshooting Data Center Infrastructure Troubleshooting

How to resolve a down state VFC interface on a Cisco Nexus Switch?

Single Choice

Refer to the exhibit. An engineer discovered a VFC interface in a down state on a Cisco Nexus Switch. Which action resolves the problem?

Change the cable between the switch and the server

Reset the Cisco Nexus port toward the file server

Update the CNA firmware and driver versions

Modify the fip keepalive message time to 30 seconds

Data Center Infrastructure Troubleshooting Data Center Infrastructure Troubleshooting

What should be added to the EEM script to resolve the issue of overriding all events in the system policy?

Single Choice

Refer to the exhibit. The EEM script overrides all events in the system policy. What should be added to the script to resolve the issue?

event statement

environment variable

event-default action statement

configure terminal action

Data Center Infrastructure Troubleshooting Data Center Infrastructure Troubleshooting

What are the possible causes of issues in Cisco UCS Director that an engineer troubleshoots?

DragAndDrop

An engineer troubleshoots issues in Cisco UCS Director. Drag and drop the possible causes of the issues from the left onto the corresponding issues on the right.

Data Center Infrastructure Troubleshooting Data Center Infrastructure Troubleshooting

Previous Questions

Next Questions

Cisco (300-615-DCIT) Exam Questions And Answers page 16

How to resolve the issue of being unable to log in to the Cisco IMC page of a Cisco UCS C220 server?

Comments

How to resolve a server failing to boot from the operating system after a RAID1 cluster migration?

Comments

How to resolve the issue of both switches showing HSRP instance as active?

Comments

How can the vPC neighborship between two switches be resolved and brought up from a suspended state?

Correct Answer:

References:

Comments

What are the requirements for using Puppet in a Cisco NX-OS environment?

Comments

What action resolves the issue when receiving a 400 error after running a curl command?

Correct Answer:

References:

Comments

How to resolve the issue of Linux hosts failing to boot from SAN on Cisco UCS B-Series Servers?

Correct Answer:

Explanation:

References:

Comments

How to resolve a down state VFC interface on a Cisco Nexus Switch?

Correct Answer:

References:

Comments

What should be added to the EEM script to resolve the issue of overriding all events in the system policy?

Comments

What are the possible causes of issues in Cisco UCS Director that an engineer troubleshoots?

Comments

{{ exam.shortName }}

{{ exam.longName }}