Implementing Cisco Application Centric Infrastructure 300-620-DCACI

Cisco (300-620-DCACI) Exam Questions And Answers page 8

What feature should be enabled in the bridge domain to reduce instability during a migration to Cisco ACI?

Single Choice

A customer migrates a legacy environment to Cisco ACI. A Layer 2 trunk is configured to interconnect the two environments. The customer also builds ACI fabric in an application-centric mode. Which feature should be enabled in the bridge domain to reduce instability during the migration?

Set Multi-Destination Flooding to Flood in BD.

Enable Flood in Encapsulation.

Set Multi-Destination Flooding to Flood in Encapsulation.

Disable Endpoint Dataplane Learning

ACI Fabric Access Policies ACI Fabric Connectivity Policies

Which configuration set should be used to securely export Cisco APIC configuration snapshots?

Single Choice

An engineer must securely export Cisco APIC configuration snapshots to a secure, offsite location The exported configuration must be transferred using an encrypted tunnel and encoded with a platform-agnostic data format that provides namespace support. Which configuration set must be used?

Policy: Export Policy
Protocol: TLS
Format: JSON

Policy: Import Policy
Protocol: TLS
Format: XML

Policy: Import Policy
Protocol: SCP
Format: JSON

Policy: Export Policy
Protocol: SCP
Format: XML

ACI Fabric Access Policies ACI Tenant Policies

How to configure secure access to Cisco ACI OOB management from specific external subnets?

Single Choice

A network engineer must allow secure access to the Cisco ACI out-of-band (OOB) management only from external subnets 10.0.0.0/24 and 192.168.20.0/25. Which configuration set accomplishes this goal?

Create a L3Out in the MGMT tenant in OOB VRF.
Set External Management Network Instance Profile as a consumer of the OOB contract.
Create an External EPG with two subnet entries with the external subnets.

Create a PBR service graph in the MGMT tenant.
Create a management Profile with the required OOB EPG.
Redirect all traffic going into ACI management to the external firewall.
Create two subnet entries under the OOB Bridge domain with the required subnets.

Create an EPG and BD in the MGMT tenant in OOB VRF.
Set OOB VRF to provide the contract.
Set a new EPG to consume the OOB contract.

Create an OOB contract that allows the required ports.
Provide the contract from the OOB EPG.
Consume the contract by the OOB External Management Network Instance Profile.
Create two subnet entries in the External Management Network Profile with the required subnets.

ACI Fabric Access Policies ACI Fabric Connectivity Policies

How to configure the default gateway for a bridge domain in a Multi-Pod system in ACI?

Single Choice

An engineer configures a Multi-Pod system with the default getaway residing outside of the ACI fabric for a bridge domain. Which setting should be configured to support this requirement?

disable Limit IP Learning to Subnet

disable IP Data-plane Learning

disable Unicast Routing

disable Advertise Host Routes

ACI Fabric Access Policies ACI Fabric Connectivity Policies

What Adjacency Type value should be used when client endpoint and service node interface are in different subnets?

Single Choice

Refer to the exhibit. Which Adjacency Type value should be set when the client endpoint and the service node interface are in a different subnet?

Routed

Unicast

L3Out

ACI Fabric Connectivity Policies ACI Fabric Automation

What is the type of port used for in-band management in ACI fabric?

Single Choice

Which type of port is used for in-band management within ACI fabric?

spine switch port

APIC console port

leaf access port

management port

ACI Fabric Access Policies ACI Fabric Connectivity Policies

What tenant is used for configuring in-band management IP addresses for Cisco APICs, leaf nodes, and spine nodes?

Single Choice

Which tenant is used when configuring in-band management IP addresses for Cisco APICs, leaf nodes, and spine nodes?

default

infra

common

mgmt

ACI Fabric Access Policies ACI Tenant Policies

How to implement the inter-tenant service graph?

Single Choice

Refer to the exhibit. An engineer must implement the inter-tenant service graph. Which set of actions must be taken to accomplish this goal?

" Define the contract in the provider tenant and export it to the consumer tenant.
" Define the L4-L7 device, service graph template, and ASA bridge domains in the provider tenant.

" Define the contract in the provider tenant and export it to the consumer tenant.
" Define the L4-L7 device and service graph template in the provider tenant and the ASA bridge domains in the consumer tenant.

" Define the contract in the provider tenant and export it to the provider tenant.
" Define the L4-L7 device and service graph template in the provider tenant and the ASA bridge domains in the consumer tenant.

" Define the contract in the provider tenant and export it to the provider tenant.
" Define the L4-L7 device, service graph template, and ASA bridge domains in the consumer tenant.

ACI Tenant Policies ACI Application Network Profiles

Which export policy should be used to backup the PRODUCTION tenant configuration on the APIC?

Single Choice

A network engineer must backup the PRODUCTION tenant. The configuration backup should be stored on the APIC using a markup language and contain all secure information. Which export policy must be used to meet these requirement?

ACI Tenant Policies ACI Fabric Automation

How to receive required messages for monitoring configuration changes, threshold crossing, and link-state transitions in Cisco ACI fabric?

Single Choice

An engineer wants to monitor all configuration changes, threshold crossing, and link-state transitions in a Cisco ACI fabric. Which action must be taken to receive the required messages?

Add Faults and Events to the monitor policy.

Add Session Logs and Audit Logs to the monitor policy.

Include Audit Logs and Events in the Syslog source policy.

Include Events and Session Logs in the Syslog source policy.

ACI Fabric Access Policies ACI Fabric Connectivity Policies

Previous Questions

Next Questions

Cisco (300-620-DCACI) Exam Questions And Answers page 8

What feature should be enabled in the bridge domain to reduce instability during a migration to Cisco ACI?

Comments

Which configuration set should be used to securely export Cisco APIC configuration snapshots?

Comments

How to configure secure access to Cisco ACI OOB management from specific external subnets?

Comments

How to configure the default gateway for a bridge domain in a Multi-Pod system in ACI?

Comments

What Adjacency Type value should be used when client endpoint and service node interface are in different subnets?

Correct Answer:

Explanation:

Comments

What is the type of port used for in-band management in ACI fabric?

Comments

What tenant is used for configuring in-band management IP addresses for Cisco APICs, leaf nodes, and spine nodes?

Correct Answer:

References:

Comments

How to implement the inter-tenant service graph?

Comments

Which export policy should be used to backup the PRODUCTION tenant configuration on the APIC?

Comments

How to receive required messages for monitoring configuration changes, threshold crossing, and link-state transitions in Cisco ACI fabric?

Comments

{{ exam.shortName }}

{{ exam.longName }}