Implementing Cisco Storage Area Networking 300-625-DCSAN

Cisco (300-625-DCSAN) Exam Questions And Answers page 1

What is preventing an operator user from updating the zoneset in the given exhibit?

Single Choice

Refer to the exhibit.

A user who is logged in as an operator cannot update the zoneset. What is the cause of this issue?

The fabric is locked by admin on switch-2.

Hard zoning is enabled.

Merge control is disabled.

The switch has a conflicting domain ID.

The fabric is locked by admin on another switch.

Cisco MDS 9000 Series Switch Configuration Storage Virtualization

When should a device alias be used instead of a Fibre Channel alias?

Single Choice

Which condition requires using a device alias rather than a Fibre Channel alias?

The zone database must be distributed over the fabric.

The same alias must be used in zoning as well as DPVM.

All aliases being used are being configured in the same VSAN.

Aliases must be saved within a central database on the fabric.

Fibre Channel (FC) Protocol

What is the initial component responsible for loading the kickstart image on Cisco MDS Switches?

Single Choice

Which component is initially responsible for loading the kickstart image on Cisco MDS Switches?

ROMMON

BIOS

NX-OS

BASH

Cisco MDS 9000 Series Switch Configuration

What is the first location checked by a Cisco MDS Series Switch with POAP feature when it enters POAP mode and does not find the startup configuration?

Single Choice

A Cisco MDS Series Switch with the POAP feature boots and does not find the startup configuration. Which location is checked first when the switch enters POAP mode?

USB device that contains the software image files and the switch configuration file

DHCP server to bootstrap the interface IP address, gateway, DNS server, and TFTP IP addresses

TFTP server where the necessary configuration files are downloaded

HTTP server where the URL is used to download the software image

Cisco MDS 9000 Series Switch Configuration

How to ensure continued operation when configuring inter-VSAN routing with duplicate domain IDs?

Single Choice

A storage administrator is configuring inter-VSAN routing on a fabric that contains duplicate domain IDs. Which feature must be configured to ensure continued operation?

auto topology

transit VSANs

IVR NAT

virtual domains

Data Center Bridging (DCB)

What action could have prevented the failure of the install command on the standby supervisor module during the upgrade of a Cisco MDS Director?

Single Choice

A storage network engineer is upgrading a Cisco MDS Director with dual supervisor modules. The install command is executed on the standby supervisor module but fails. Which action would have prevented this failure?

All FCoE interfaces configured on the MDS must be shut down before starting the upgrade.

The upgrade must be done on the active supervisor module only.

Cisco Fabric Services must be disabled before starting the upgrade.

Fabric Controller Service must be stopped before starting the upgrade.

Cisco MDS 9000 Series Switch Configuration

What setting must match on both fabrics before successfully merging device alias information?

Single Choice

Refer to the exhibit.

Device alias information must be merged for two fabrics. Which setting must match on both fabrics before the merge can be performed successfully?

device-alias mode

session

qos

smart-zoning

Fibre Channel (FC) Protocol

What is the outcome of merging the fabric?

Single Choice

Refer to the exhibit.

What is the result of merging the fabric?

The merged fabric IVR VSAN topology is set to activate.

The merged fabric has NAT enabled.

The merge is invalid.

The merged fabric contains only service group Group1.

Fibre Channel (FC) Protocol Fibre Channel over Ethernet (FCoE) Protocol

What are the two conditions that a network engineer must consider when configuring a Cisco MDS switch for FCoE implementation?

Multiple Choice

A network engineer is configuring a Cisco MDS switch for FCoE. Which two conditions must be considered during the implementation phase? (Choose two.)

On Cisco MDS switches, system-defined class maps for class-FCoE and class-default are enabled but can be deleted.

The QoS policy must be identical to other Cisco FCoE switches in the network.

On the Cisco MDS, the MTU is set equal to 2112.

VLAN 1 or the native VLAN can be mapped to an FCoE VSAN.

FCoE is already enabled on a Cisco MDS switch.

Cisco MDS 9000 Series Switch Configuration Fibre Channel over Ethernet (FCoE) Protocol

What are the FLOGI parameters and their corresponding descriptions in Cisco Storage Area Networking?

DragAndDrop

Drag and drop the FLOGI parameters from the left onto the descriptions from which they were-derived on the right.

Fibre Channel (FC) Protocol

Cisco (300-625-DCSAN) Exam Questions And Answers page 1

What is preventing an operator user from updating the zoneset in the given exhibit?

Comments

When should a device alias be used instead of a Fibre Channel alias?

Comments

What is the initial component responsible for loading the kickstart image on Cisco MDS Switches?

Comments

What is the first location checked by a Cisco MDS Series Switch with POAP feature when it enters POAP mode and does not find the startup configuration?

Comments

How to ensure continued operation when configuring inter-VSAN routing with duplicate domain IDs?

Comments

What action could have prevented the failure of the install command on the standby supervisor module during the upgrade of a Cisco MDS Director?

Comments

What setting must match on both fabrics before successfully merging device alias information?

Comments

What is the outcome of merging the fabric?

Comments

What are the two conditions that a network engineer must consider when configuring a Cisco MDS switch for FCoE implementation?

Comments

What are the FLOGI parameters and their corresponding descriptions in Cisco Storage Area Networking?

Explanation:

References:

Comments

{{ exam.shortName }}

{{ exam.longName }}