Cisco (350-401-ENCOR) Exam Questions And Answers page 36
Refer to the exhibit.
What is the result when a technician adds the monitor session 1 destination remote vlan 223 command?
What is the result when a technician adds the monitor session 1 destination remote vlan 223 command?
RSPAN traffic is sent to VLANs 222 and 223.
An error is flagged for configuring two destinations.
RSPAN traffic is split between VLANs 222 and 223.
Infrastructure
Network Assurance
Drag and drop the descriptions from the left onto the correct QoS components on the right.
Infrastructure
Network Assurance
Refer to the exhibit. The trunk between Gig1/0/1 of switch SW2 and Gig1/0/1 of switch SW1 is not operational. Which action resolves this issue?
Configure both interfaces to nonegotiate and ensure that the switches are in different VTP domains.
Configure both interfaces in dynamic auto DTP mode and ensure that the switches are in the same VTP domain.
Configure both interfaces in dynamic auto DTP mode and ensure that the switches are in different VTP domains.
Configure both interfaces in dynamic desirable DTP mode and ensure that the switches are in the same VTP domain.
Infrastructure
Network Assurance
Refer to the exhibit. An engineer is configuring an EtherChannel between Switch1 and Switch2 and notices the console message on Switch2. Based on the output, which action resolves this issue?
Configure more member ports on Switch1.
Configure less member ports on Switch2.
Configure the same port channel interface number on both switches.
Configure the same EtherChannel protocol on both switches.
Infrastructure
Network Assurance
What is the function of the fabric control plane node in a Cisco SD-Access deployment?
It is responsible for policy application and network segmentation in the fabric.
It performs traffic encapsulation and security profiles enforcement in the fabric.
It holds a comprehensive database that tracks endpoints and networks in the fabric.
It provides integration with legacy nonfabric-enabled environments.
Virtualization
Infrastructure
Refer to the exhibit.
An engineer must create a script that appends the output of the show process cpu sorted command to a file. Which action completes the configuration?
An engineer must create a script that appends the output of the show process cpu sorted command to a file. Which action completes the configuration?
action 4.0 syslog command "show process cpu sorted | append flash:high-cpu-file"
action 4.0 cli command "show process cpu sorted | append flash:high-cpu-file"
action 4.0 cns-event "show process cpu sorted | append flash:high-cpu-file"
action 4.0 publish-event "show process cpu sorted | append flash:high-cpu-file"
Virtualization
Security
A network engineer configures a WLAN controller with increased security for web access. There is IP connectivity with the WLAN controller, but the engineer cannot start a management session from a web browser. Which action resolves the issue?
Disable Adobe Flash Player.
Use a private or incognito session.
Use a browser that supports 128-bit or larger ciphers.
Disable JavaScript on the web browser.
Infrastructure
Security
An engineer must configure HSRP group 300 on a Cisco IOS router. When the router is functional, it must be the active HSRP router. The peer router has been configured using the default priority value. Which command set is required?
standby version 2
standby 300 priority 110
standby 300 preempt
standby 300 priority 110
standby 300 preempt
standby 300 priority 110
standby 300 timers 1 110
standby 300 timers 1 110
standby version 2
standby 300 priority 90
standby 300 preempt
standby 300 priority 90
standby 300 preempt
standby 300 priority 90
standby 300 preempt
standby 300 preempt
Virtualization
Infrastructure
You administer the OSPF network shown in the diagram above. The reference bandwidth has been changed to 1000 on every router in the network.
What is the cost of the route from RouterA to RouterC? (Select the best answer.)
3
2
11
12
20
Network Assurance
Security
Refer to the exhibit. An engineer configures monitoring on SW1 and enters the show command to verify operation. What does the output confirm?
RSPAN session 1 is incompletely configured for monitoring.
RSPAN session 1 monitors activity on VLAN 50 of a remote switch.
SPAN session 2 monitors all traffic entering and exiting port FastEthernet 0/15.
SPAN session 2 only monitors egress traffic exiting port FastEthernet 0/14.
Infrastructure
Network Assurance
Comments