Cisco (350-601-DCCOR) Exam Questions And Answers page 18
An engineer must design an automation solution for the Cisco ACI Fabric to speed up the deployment of logical network elements for tenant provisioning. When creating a solution, the engineer must keep in mind that the tool must support these requirements:
" Allow the rapid creation and removal of logical containers.
" Support the creation of custom modules and data structures.
" Be extensible with external libraries and modules.
" Allow rapid testing of code using an on-demand execution environment.
Which automation tool meets these requirements?
" Allow the rapid creation and removal of logical containers.
" Support the creation of custom modules and data structures.
" Be extensible with external libraries and modules.
" Allow rapid testing of code using an on-demand execution environment.
Which automation tool meets these requirements?
SaltStack
YAML
Chef
Network Virtualization
Automation
Refer to the exhibits. ESXi-Server is associated to the blade server. A VLAN is added to Trunk-A. The VLAN is missing on the vNIC of ESXi-Server. Which action should be taken to add the VLAN to the vNIC?
Change the template type of Trunk-A to an updating template.
Remove the VLAN from the Trunk-A template and add the VLAN again.
Change the template type of ESXi-Server to an updating template.
Remove both templates and recreate them as updating templates.
Network Virtualization
Compute
Refer to the exhibit. During a vPC peer switch reload, there is packet loss between the server and the router. Which action must be taken to prevent this behavior during future reloads?
Set the routed uplink ports of the Cisco Nexus peers as orphans.
Increase the vPC delay restore timer.
Disable vPC ARP synchronize on the vPC peers.
Decrease the OSPF hello and dead interval timers.
Network Virtualization
Compute
An engineer needs to make an XML backup of Cisco UCS Manager. The backup should be transferred using an authenticated and encrypted tunnel, and it should contain all system and service profiles configuration. Which command must be implemented to meet these requirements?
copy running-config scp://user@host35/backups/all-config9.bak all-configuration
create backup scp://user@host35/backups/all-config9.bak all-configuration
create file scp://user@host35/backups/all-config9.bak all-configuration
copy startup-config scp://user@host35/backups/all-config9.bak all-configuration
Storage Networking
Security
A network engineer must perform a backup and restore of the Cisco Nexus 5000 Series Switch configuration. The backup must be made to an external backup server. The only protocol permitted between the Cisco Nexus Series switch and the backup server is UDP. The backup must be used when the current working configuration of the switch gets corrupted. Which set of steps must be taken to meet these requirements?
1. Perform a running-config backup to an SFTP server.
2. Copy backup-config from the SFTP server to the running-config file.
2. Copy backup-config from the SFTP server to the running-config file.
1. Perform a startup-config backup to a TFTP server.
2. Copy backup-config from the backup server to the running-config file.
2. Copy backup-config from the backup server to the running-config file.
1. Perform a running-config backup to an SCP server.
2. Copy running-config in the boot flash to the running-config file.
2. Copy running-config in the boot flash to the running-config file.
1. Perform a startup-config backup to an FTP server.
2. Copy startup-config in the boot flash to the running-config file.
2. Copy startup-config in the boot flash to the running-config file.
Network Virtualization
Security
Refer to the exhibit.
An engineer is implementing zoning on two Cisco MDS switches. After the implementation is finished, E Ports that connect the two Cisco MDS switches become isolated.
What is wrong with the implementation?
An engineer is implementing zoning on two Cisco MDS switches. After the implementation is finished, E Ports that connect the two Cisco MDS switches become isolated.
What is wrong with the implementation?
Zones are local to the MDS switch and name service must be used to activate the connection between E Ports.
Different zone set names must be configured on both MDS switches.
Zones must have the same name on both MDS switches for the E Ports to function.
E Ports on both MDS switches must be configured as F Ports for the zoning to function.
Network Virtualization
Storage Networking
Which storage protocol reduces file locks by using leasing?
SMB
NFS 3
NFS 4
CIFS
Storage Networking
Security
A Cisco ACI engineer must configure an access port on a Cisco ACI leaf switch. The access policy should be configured so that it supports L3Out connectivity concurrently with several EPGs that are mapped to this interface with the static port method. How should the access policy be configured?
by linking the interface policy group to multiple Attachable Access Entity Profiles
with two interface policy groups that are linked to the same interface profile port selector
by mapping a single physical domain, mapped to the L3out and EPG interfaces
with a single Attachable Access Entity Profile that is linked to the corresponding routed domain and physical domain
Network Virtualization
Compute
An engineer is implementing security on the Cisco MDS 9000 switch.
Drag and drop the descriptions from the left onto the correct security features on the right.
Drag and drop the descriptions from the left onto the correct security features on the right.
Storage Networking
Security
Which two authentication types does Cisco UCS Manager support when configuring authentication? (Choose two.)
PAM
local
802.1X
Kerberos
LDAP
Automation
Security
Comments