Implementing and Operating Cisco Data Center Core Technologies 350-601-DCCOR

Cisco (350-601-DCCOR) Exam Questions And Answers page 25

What is the data interchange format presented in this output?

Single Choice

Which data interchange format is presented in this output?

CSS

YAML

XML

JSON

Network Virtualization Storage Networking

How can the Cisco UCS Manager be made available over HTTPS after a domain name change?

Single Choice

Due to a domain name change at a customer site, a Cisco UCS cluster must be renamed. An engineer must recommend a solution to ensure that the Cisco UCS Manager is available over HTTPS.

Which action accomplishes this goal?

Regenerate the default key ring certificate manually

Reinstall the cluster to generate the default key ring certificate

Reboot the SSO component of the Cisco UCS Manager

Generate a new default key ring certificate from the Cisco UCS Manager

Compute Security

Which LSA type is sent to the remote office OSPF area when connecting via NSSA ASBR?

Single Choice

A small remote office is set to connect to the regional hub site via NSSA ASBR.

Which type of LSA is sent to the remote office OSPF area?

type 7 LSA

type 1 LSA

type 5 LSA

type 3 LSA

Network Virtualization Security

How should a storage engineer configure zoning on a Cisco MDS 9000 Series switch?

DragAndDrop

A storage engineer must configure zoning on a Cisco MDS 9000 Series switch. Drag and drop the actions from the left into the order on the right.

Data Center Infrastructure Storage Networking

What is the configuration to connect a storage array to port ethernet1/10 on a Cisco MDS 9000 Series Switch using FCoE protocol and single-homed connection?

Single Choice

A storage array must be connected to port ethemet1/10 on a Cisco MDS 9000 Series Switch. In addition, the array must connect using the FCoE protocol and be single-homed. Which configuration meets these requirements?

vsan database
vlan 101
vsan 101
fcoe vsan 101 interface vfc 10

interface 1/10
switchport mode e
fcoe vfc 10

interface vfc 10
switchport mode f
bind interface ethernet 1/10

vsan database
vsan 101
vlan 101
fcoe vsan 101
vsan 101 interface vfc 10

vlan database
vlan 101 vsan
vsan 101 fcoe
vsan 101 interface vfc 10

interface ethemet1/10
switchport mode trunk
bind interface vfc 10
fcoe vsan 101

vlan database
vlan 101 fcoe
vsan 101 enable
interface vfc 10 vsan 101

interface vfc 10
switchport mode fcoe
switchport access vlan 101
bind interface ethenet1/10

Storage Networking Security

What is the output of the command presented in the exhibit?

Single Choice

Refer to the exhibit.

What is the result of running the command presented?

Multicast traffic forwarding is suspended.

MRIB is flushed.

The PIM database is deleted.

PIM join messages are suspended.

Network Virtualization Security

What action is needed to complete the vPC domain implementation?

Single Choice

Refer to the exhibit. Which action completes the vPC domain implementation?

Add the vPC member ports to the vPC channel group.

Configure the system MAC on the vPC domain.

Include the VRF management on the vPC domain.

Allow VLANs on the vPC peer link member interfaces.

Network Virtualization Orchestration and Management

How to modify an overridden policy to change the number of FCNS database entries to 1500?

Single Choice

An engineer must modify an overridden policy by changing the number of FCNS database entries to 1500 and then generate a message.

What configuration will accomplish this task?

event manager applet fcns_policy
event fcns entries max-per-switch 1500
action 1.0 syslog priority warnings msg FCNS DB entries have reached the EEM limit
action 2.0 policy-default

event manager applet fcns_policy override __fcns_entries_max_per_switch
action 1.0 syslog priority errors "CNS DB entries have reached the EEM limit"
action 2.0 policy-default

event manager applet fcns_policy override __fcns_entries_max_per_switch
event fcns entries max-per-switch 1500
action 1.0 syslog priority warnings msg FCNS DB entries have reached the EEM limit

event manager applet fcns_policy
action 1.0 syslog priority warnings msg FCNS DB entries have reached the EEM limit
action 2.0 event-default

Storage Networking Automation

What actions are required to add a new FCoE VLAN to Cisco Nexus 7706 Series Switches in a data center segment?

Single Choice

A company is running a pair of Cisco Nexus 7706 Series Switches as part of a data center segment. All network engineers have restricted read-write access to the core switches. A network engineer must add a new FCoE VLAN to allow traffic from servers toward FCoE storage. Which set of actions must be taken to meet these requirements?

1. Assign the network-admin role to a user.
2. Commit the role to the switch to the active user database.

1. Modify a network-operator role and add the required privileges.
2. Assign a VDC-operator role to a user.

1. Create a user-defined role and add the required privileges.
2. Assign a role to a user.

1. Add the required privilege to the VDC-admin role.
2. Commit the changes to the active user database.

Data Center Infrastructure Storage Networking

What action must be taken to implement NPV mode on a Cisco MDS 9000 Series Switch?

Single Choice

An engineer is implementing NPV mode on a Cisco MDS 9000 Series Switch.

Which action must be taken?

NPIV must be enabled on the upstream switch.

The FCNS database must be disabled in the fabric.

A port channel must be configured to the upstream switch.

All switches in the fabric must be Cisco MDS switches.

Storage Networking Security

Cisco (350-601-DCCOR) Exam Questions And Answers page 25

What is the data interchange format presented in this output?

Comments

How can the Cisco UCS Manager be made available over HTTPS after a domain name change?

Correct Answer:

References:

Comments

Which LSA type is sent to the remote office OSPF area when connecting via NSSA ASBR?

Comments

How should a storage engineer configure zoning on a Cisco MDS 9000 Series switch?

References:

Comments

What is the configuration to connect a storage array to port ethernet1/10 on a Cisco MDS 9000 Series Switch using FCoE protocol and single-homed connection?

Comments

What is the output of the command presented in the exhibit?

Comments

What action is needed to complete the vPC domain implementation?

Comments

How to modify an overridden policy to change the number of FCNS database entries to 1500?

Comments

What actions are required to add a new FCoE VLAN to Cisco Nexus 7706 Series Switches in a data center segment?

Comments

What action must be taken to implement NPV mode on a Cisco MDS 9000 Series Switch?

Comments

{{ exam.shortName }}

{{ exam.longName }}